Honda GP160 Bedienungsanleitung Seite 5

5. Operate the starter.
RECOIL STARTER
Pull the starter grip lightly until you feel resistance, then pull
briskly in the direction of the arrow as shown below. Return the
starter grip gently.
STARTER GRIP
Direction to pull
Do not allow the starter grip to snap back against the engine.
Return it gently to prevent damage to the starter.
6. If the choke lever or choke rod (applicable types) was moved to
the CLOSED position to start the engine, gradually move it to
the OPEN position as the engine warms up.
OPEN
CHOKE LEVER
OPEN
CLOSED
CHOKE LEVER
OPEN
CLOSED
STOPPING THE ENGINE
To stop the engine in an emergency, simply turn the engine switch
to the OFF position. Under normal conditions, use the following
procedure. Refer to the instructions provided by the equipment
manufacturer.
1. Move the throttle lever fully to the MIN. position.
Some engine applications use a remote-mounted throttle control
rather than the engine-mounted throttle lever shown here.
THROTTLE LEVER
MIN.
2. Turn the engine switch to the OFF position.
ENGINE SWITCH
3. Turn the fuel valve lever to the OFF position.
OFF
SETTING ENGINE SPEED
Position the throttle lever for the desired engine speed.
Some engine applications use a remote-mounted throttle control
rather than the engine-mounted throttle lever shown here. Refer to
the instructions provided by the equipment manufacturer.
For engine speed recommendations, refer to the instructions
provided with the equipment powered by this engine.
THROTTLE LEVER
MAX.
MIN.
ENGLISH
MIN.
OFF
OFF
FUEL VALVE LEVER
ON
OFF
MAX. MIN.
5