Before You Begin - Bresser TempTrend Bedienungsanleitung

BEFORE YOU BEGIN

For best operation,
1. Insert batteries for remote units before doing so for
2. Place the main unit as close as possible next to the
3. Position the remote unit and main unit within
BATTERY INSTALLATION: REMOTE UNIT
1. Remove the screws on the battery compartment.
2. Select the channel
3. Install 2 batteries (UM-3 or "AA" size 1.5V) strictly
4. Replace the battery compartment door and secure
BATTERY INSTALLATION: MAIN UNIT
1. Open the battery compartment door.
2. Install 2 batteries (UM-3 or "AA" size 1.5V) strictly
3. Replace the battery compartment door.
LOW BATTERY WARNING
When it is time to replace batteries, the respective low-
battery indicator will show up on the indoor or outdoor
temperature.
Downloaded from www.Manualslib.com
the main unit.
remote unit.
effective transmission range.
Note that the effective range is vastly affected by the
building materials and where the main and remote
units are positioned. Try various set-ups for best
result.
Though the remote units are weather proof, they
should be placed away from direct sunlight, rain or
snow.
according to the polarities shown.
its screws.
according to the polarities shown.
manuals search engine
25
GB/IE