Maintenance; General; Cleaning - Pelgrim GKT814 Anleitung

MAINTENANCE

General

Cleaning

Your appliance has been manufactured from high-quality materials,
which are easy for you to clean.
• Regular cleaning immediately after use prevents over-cooked food
from being able to become ingrained and cause stubborn stains
that are difficult to remove. Use a mild cleaning agent. Do not use
too much liquid as it can get into the burner or vents.
• First clean the controls, burners and pan supports and then the hob
surface. This will ensure that the hob doesn't get dirty again while
your are cleaning it.
• It is best to clean the spark plugs with a cloth. Some care should be
taken when doing this. The spark plug may otherwise develop a fault.
The spark plug will only operate correctly in a dry environment. If the
plug is very dirty, you may clean it with a tiny brush.
• Place the pan supports straight down without sliding them over the
hob surface.
• Assemble the burner parts using the guide ridges. Note the cut-
outs for the spark plug and thermocouple. Make sure that the
burner parts are lying flat.
Cleaning the pan support
Do not clean the pan supports in the dishwasher. The enamel on the
pan supports is suitable for cleaning in a dishwasher. However, the
connection with the rubber feet is not. Moreover, the pan supports
might suffer some discoloration if they are washed in the dishwasher. If
you lose the rubber feet, then the pan support is likely to damage the
hob surface.
Stubborn stains on enamel (pan supports, burner caps)
Stubborn stains can be removed with a non-abrasive cream cleaner.
Never use scouring powder, scouring pads, sharp objects or aggressive
cleaning agents.
GB 15