Clock Functions - AEG BP8715001 Benutzerinformation

7. CLOCK FUNCTIONS

Downloaded from www.Manualslib.com
6.7 Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
6.8 Energy saving
The appliance contains features
which help you save energy
during everyday cooking:
• Residual heat:
– When the heating function or pro-
gramme operates, the heating ele-
ments are deactivated 10 % earlier
(the lamp and fan continue to oper-
ate). For this feature to operate, the
cooking time must be longer than
30 minutes or you must use the
clock functions ( Duration , End
Time ).
7.1 Clock functions
Symbol Function
Minute Minder
Duration
End Time
If you set the time for a clock function,
the time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration and End Time
the appliance deactivates the
heating elements after 90 % of
the set time. The appliance uses
the residual heat to continue the
cooking procedure until the time
ends (3 - 20 minutes).
Setting the clock functions
1. Set a heating function.
manuals search engine
– When the appliance is off, you can
use the heat to keep food warm.
The display shows the remaining
temperature.
• Cooking with the lamp off - Touch
and hold
vate the lamp during cooking.
• When you use the Moist Fan Baking
function, the lamp deactivates after 30
seconds. The lamp activates again
when you touch
When you use the Eco functions, the
lamp deactivates after 30 seconds.
The lamp activates again when you
touch
• Eco functions - refer to " Heating
Functions ".
Description
To set a countdown (max 2 h 30 min). This function
has no effect on the operation of the appliance.
You can also activate it when the appliance is off.
Use to activate the function. Press
set the minutes and OK to start.
To set how long the appliance has to be in opera-
tion (max. 23 h 59 min).
To set the switch-off time for a heating function
(max. 23 h 59 min).
2.
Press
display shows the necessary clock
function and the related symbol.
3.
Press
time. Press OK to confirm.
,
When the time ends, an acoustic sig-
nal sounds. The appliance deacti-
vates. The display shows a message.
4. Press a sensor field to stop the sig-
nal.
ENGLISH
for 3 seconds to deacti-
for 3 seconds.
for 3 seconds.
or
again and again until the
or to set the necessary
13
to