Testing Water Hardness - Pelgrim COS824RVS Bedienungsanleitung

TESTING WATER HARDNESS

Water hardness test should be carried out before first use.
A strip will appear on the display with the sign "Very hard water".
Maximum water hardness is set as a factory default.
4 green stripes
CHANGING THE WATER HARDNESS SETTING
Water hardness can also be set in the menu CHOOSING THE GENERAL SETTINGS.
16
1 red stripe
2 red stripes
3 red stripes
4 red stripes
Incorrect water hardness level setting could affect appliance
operation and useful life.
Very soft water
Soft water
Medium hard water
Hard water
Very hard water
Soak the test paper
strip (supplied
with the appliance)
in water for one
(1) second. Wait
one minute and
observe the number
of stripes on the
paper. Enter the
information on the
number of stripes
into the appliance.
Rotate the KNOB
and confirm.