Chorum 10 Dlx – Chorum S10 – Chorum 10
User Manual
START: the sequencer has started to record or play back a MIDI sequence
STOP: the sequencer has been stopped
PAUSE / CONTINUE: the sequencer has been set in stop status
CLOCK: the sequencer speed
N.B.
The organ does not transmit / receive the messages described above. They are described for your
information only.
The Real Time messages also include the Active Sensing code, sent to keep the dialogue between
two MIDI instruments alive. When the receiver instrument does not receive any MIDI data or the
Active Sensing code in a time interval of about 300 milliseconds, it considers the MIDI connection
to have been deactivated, so it switches off any notes still active. Remember that the transmission
and reception of this message is optional, so not all instruments are equipped to handle it.
EN - 24