Herunterladen Inhalt Inhalt Diese Seite drucken

Electrical Connection; Adjustments - Angelo Po 20N1SCP Bedien- Und Installationshandbuch

Automatische hebenvorrichtung
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 35

ELECTRICAL CONNECTION

Important
The connection must be made by authorised,
skilled personnel, in accordance with the rel-
evant legal requirements, using appropriate
and specified materials. The appliance is
supplied with operating voltage 230V/1N,
which cannot be switched to other values.
Caution - warning
Before doing any work, cut off the mains elec-
tricity supply.
Connect the appliance to the mains electricity sup-
ply as follows.
1 - If not already present, install a circuit-breaker
(A) with overload cutout and differential safety
breaker close to the appliance.
2 - Undo the screws (C) and remove the con-
trol panel (B).
3 - Connect the circuit-breaker (A) to the termi-
nal board (D) of the appliance as shown in the di-
agram and in the electrical system diagram at the
back of the manual. Use a flexible cable with at
TESTING OF THE APPLIANCE
IT
Important
Before it is put into service, the system
GB
must be tested to check the operating con-
ditions of every single component and
DE
identify any malfunctions. In this stage, it is
important to check that all health and safety
FR
requirements have been complied with in
full.
ES
ADJUSTMENTS PROCEDURE
The appliance's main functions do not require any
special adjustments by specialist staff except the
settings made during use by the user.
English
When connecting, take care to connect the
neutral and earth lines.
4 - Replace the control panel (B) on completion of
To test the system, make the following checks.
1 - Check that the mains voltage is the same as
2 - Operate the appliance's circuit-breaker to
After testing, if necessary instruct the user in all the
skills necessary for putting the appliance into oper-
ation in conditions of safety, in accordance with le-
gal requirements.

ADJUSTMENTS

- 14 -
A
C
B
least type H07RN-F characteristics, rated for an
operating temperature of at least 80°C.
Important
the operation.
that of the appliance.
check the electrical connection.
D
8

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

20t1scp

Inhaltsverzeichnis