System Requirements; Specification - i-tec ADVANCE Serie Handbuch

Note:
1. Charging: You can use external power adapter, if you connect printer, scanner or other high power consumption
devices to USB ports in HUB or during some other problems (power adapter is included). Respect the basic rules
while using this power adapter (for ex. do not let in reach of children, if the adapter is in 230 V circuit, do not put it into
the water and so on).
2. Charging via USB ports: HUB supports charging connected USB mobile devices e.g. smartphones, e-book
readers, multimedia players, navigation devices and tablets (e.g. Asus, Toshiba, GoClever, Prestigio, Emgeton,
Sencor). You can connect charging device to one of 7 ports of HUB, which is also connected the external power
adapter. You can also charge Apple iPad or Samsung tablets with this device. However, for charging of these
tablets it is necessary to disconnect USB cable from PC/NB and let connected power adapter to the HUB and
use one of two side ports for charging (with BC 1.2. HUB specification).

SYSTEM REQUIREMENTS

Hardware requirements
PC or notebook with one available USB port
Operating system
Windows XP, Windows Vista, Windows 7 32/64bit, Windows 8 32/64bit, Mac OS X 10.x or higher

SPECIFICATION

7x USB 3.0 port
7x downstream (for connection USB devices) USB port, 1x upstream (for connection to PC by cable)
Transfer rate up to 5 Gbps
USB charging detection mechanism
Comply with USB-If Battery charging specifications 1.1 (BC 1.2) – 2 side ports only
Plug & Play function
Storage temperature -10~85 °C
Working temperature 0~40 °C
Power adapter input AC 100-240 V, 50-60 Hz, 1,2 A; output: DC 12 V / 2 A
OS Windows XP, Vista, 7 32/64bit, 8 32/64bit, Mac OS X 10.x or higher
Product size 145 (L) x 63 (W) x 26 (H) mm
Product weight 119 g
PACKAGE CONTENTS
USB 3.0 7-port HUB
USB 3.0 cable (100 cm)
Power adapter (cable 150 cm)
User's Guide
FAQ
Question: USB 3.0 7-port HUB is not installed automatically immediatelly after connection.
Answer: Connect the power adapter (included in the package) to USB HUB. Device should be installed
automatically in supported OS. By the way, if installation doesn't start, reboot your computer. After rebooting PC,
device installation starts.
Question: I have some problems with detection and installation of HUB.
Answer: Install the latest drivers for USB 3.0 interface of your PC/NB.
Question: The Apple tablet or Samsung tablet is not charged.
Answer: You can charge also Apple iPad (Samsung) tablets. Anyway, for charging it is necessary to disconnect USB
cable from PC and let connected power adapter to the HUB. Also you have to use one of two side ports for charging.
Downloaded from www.Manualslib.com manuals search engine
Quick Start
EN
05