SOLIS GRIND & INFUSE PRO Gebrauchsanleitung Seite 156

E
ESPRESSO MAKING: STEP BY STEP
PRE-PROGRAMMED DOSE – DOUBLE CUP
Press the two cup button once. A preset
dose of approx. 60 ml will be delivered. A pumping
noise will be heard in this operation. The machine
will automatically stop once the preset pour has
been delivered.
NOTE:
Pressing the or buttons while brew-
ing will immediately stop the water flow.
156
INDIVIDUALLY PROGRAMMING
A SINGLE ESPRESSO
1. Prepare to make a single cup of espresso by
following steps 2 to 10 in «STEP BY STEP» on
pages 150-155.
2. Place your cup underneath the group head.
3. To begin programming, press the PROGRAM
button once. The machine will beep once and
the program button will begin to flash. This
indicates the machine is in programming mode.
4. Press the one cup button once. The machine
will commence normal pour function, and the
one cup button surround will begin to flash.
5. When the desired amount of espresso has
poured into the cup, press the one cup
button to stop the pour. The machine will beep
twice, indicating it has saved your measured
pour quantity and exited programming mode.
INDIVIDUALLY PROGRAMMING
A DOUBLE ESPRESSO
1. Prepare to make a double cup of espresso by
following steps 2 to 10 in «STEP BY STEP» on
pages 150–155.
2. Place your cup underneath the group head.
3. To begin programming, press the PROGRAM
button once. The machine will beep once and
the program button will begin to flash. This in-
dicates the machine is in programming mode.
4. Press the two cup button once. The
machine will commence normal pour function,
and the two cup button surround
begin to flash.
5. When the desired amount of espresso has
poured into the cup, press the two cup
button to stop the pour. The machine
will beep twice, indicating it has saved and
exited programming mode.
will