Special Accessories; Diamond Cutting Discs; Guide Trolley; Water Tank (The Component Of Trolley) - Makita EK7650H Originalbetriebsanleitung

SPECIAL ACCESSORIES

Diamond cutting discs

MAKITA diamond cutting discs meet the highest demands
in working safety, ease of operation, and economical cutting
performance. They can be used for cutting all materials except
metal.
The high durability of the diamond grains ensures low wear and
thereby a very long service life with almost no change in disc
diameter over the lifetime of the disc. This gives consistent cutting
performance and thus high economy. The outstanding cutting
qualities of the discs make cutting easier.
The metal disc plates give highly concentric running for minimal
vibration during use.
The use of diamond cutting discs reduces cutting time significantly.
This in turn leads to lower operating costs (fuel consumption, wear
on parts, repairs, and last but not least environmental damage).

Guide trolley

The MAKITA guide trolley makes it much easier to do straight cuts,
while simultaneously enabling almost untiring working. It can be
adjusted for the operator's height, and can be operated with the
cutting attachment mounted in the middle or on the side.
A depth limiter can be added for still easier and more accurate
cutting. It makes it possible to maintain a precise predetermined cut
depth.
To keep down dust and for better cutting-disc cooling, MAKITA
offers several options for wetting the disc during operation.
• Trolley set
This is useful for road bed cutting
• Filter set
Prefilter (5 filters)
Air filter (1 filter)
Dust bag filter (1 filter)

Water tank (the component of trolley)

The water tank is designed to be mounted on the guide trolley.
Its high capacity makes it especially suitable for situations involving
frequent site changes. For filling or for fast changing to reserve
tanks, the tank can be simply lifted off the trolley.
The water tank comes with all necessary connections and hoses.
Mounting to the trolley and Power Cutter are very fast and simple.

Mains/pressure water system

The mains/pressure water system is designed to be mounted on
the Power Cutter. It can be used with or without the trolley, but is
especially suitable for applications involving hand-held, stationary
cutting. The water line has a fast-release connection, and can be
fed either from a mains supply or from a pressure tank (7).
The water system comes with all necessary connections and lines.
It can be quickly and easily mounted on the Power Cutter.
23