Installing Windows - ASROCK B75 Pro3 Handbuch

2.12 Driver Installation Guide
To install the drivers to your system, please insert the support CD into your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from top to bottom to
install those required drivers. Therefore, the drivers you install can work properly.

2.13 Installing Windows

If you want to install Windows
OS on your SATA / SATA2 / SATA3 HDDs without RAID functions, please follow the
procedures below according to the OS you install.
2.13.1 Installing Windows
If you want to install Windows
HDDs without RAID functions, please follow the steps below.
Using SATA / SATA2 / SATA3 HDDs without NCQ function
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode Selection" to [IDE]. (For SATA2_1 to SATA2_5 and
SATA3_0 ports.)
Set the option "ASMedia SATA3 Mode" to [IDE]. (For SATA3_A0 and SATA3_A1
ports.)
STEP 2: Install Windows
Downloaded from www.Manualslib.com
®
XP 64-bit Without RAID Functions
®
®
®
XP / XP 64-bit OS on your system.
ASRock B75 Pro3 Motherboard
manuals search engine
TM
7 / 7 64-bit / Vista
TM
7 / 7 64-bit / Vista / Vista
®
XP / XP 64-bit Without RAID Functions
XP / XP 64-bit OS on your SATA / SATA2 / SATA3
Advanced screen
TM
/ Vista 64-bit / XP /
TM
64-bit / XP / XP 64-bit
Storage Configuration.
35