Using The P1000X And P1500X As A Floor/Stage Monitor; Using The Pole Mount - P1000X Only - Cerwin-Vega P-Serie Bedienungsanleitung

CERWIN-VEGA! PROFESSIONAL

Using the P1000X and P1500X as a floor/stage monitor

The P1000X and P1500X can be used as a floor monitor by laying the cabinet on its side at a fixed 45 degree angle
toward the performers. It is recommended to engage the HIGH PASS FILTER which cuts low frequencies to minimize any
low frequency bass-coupling or stage rumble between the loudspeaker and the stage platform. Be sure that the
P1000X/P1500X and cables are not located where they can become a tripping hazard. It is recommended to use right
angle XLR or right angle ¼" jacks where possible to avoid cable binding between the loudspeaker and stage platform.
Using the pole mount – P1000X only
The P1000X features a SHAFT GRABBER pole mount cup that reduces unnecessary wobble when the speaker is mounted
on a pole. To use the SHAFT GRABBER, spin the disc counter-clockwise until the pole can fit into the pole mount cup.
Next, spin the SHAFT GRABBER disc clockwise until the speaker has a tight fit with the speaker pole.
14