Configuring The Dwell Time Of Autoscan Or Autoskip Function - G&D DP1.2-MUX3-ATC-Serie Installation Und Bedienung

NumUp|NumDown:
NumPageUp|NumPageDown:
Num+|Num-:
F10|F9
0|9
Num0|Num9
K|I
4. Press to save your settings.
F2

Configuring the dwell time of Autoscan or Autoskip function

By default, each automatic connection is held for 10 seconds before it is terminated
and the next channel is accessed.
You can set the dwell time of switching between channels between 1 and 99 seconds.
Configuration settings in the OSD
 Use the key to switch one channel up.
NumUp
 Use the key to switch one channel
NumDown
down.
 Use the NumPageUp
nel up.
 Use the NumPageDown
channel down.
 Use the key to switch one channel up.
Num+
 Use the key to switch one channel
Num-
down.
 Use the F10 key to switch one channel up.
 Use the F9 key to switch one channel down.
 Use the 0 key to switch one channel up.
 Use the 9 key to switch one channel down.
 Use the Num0 key to switch one channel up.
 Use the key to switch one channel
Num9
down.
 Use the K key to switch one channel up.
 Use the I key to switch one channel down.
key to switch one chan-
key to switch one
G&D DP1.2-MUX3-ATC · 44