On-Screen Display; Operating The On-Screen Display; Opening The On-Screen Display; Structure Of The On-Screen Display - G&D DP1.2-MUX3-ATC-Serie Installation Und Bedienung

On-screen display

On-screen display
You can change the configuration of the KVM switch either in the OSD or via the
web application Config Panel:
 The OSD is activated via the keyboard of the workstation and allows access to the
most frequently used configuration settings.
 The web application Config Panel provides a graphical user interface for the com-
plete configuration and monitoring of the KVM switch via web browser.
IMPORTANT: The following pages describe the configuration of the KVM switch
via OSD. Configuration via web application is described in a separate manual.

Operating the on-screen display

Opening the on-screen display

Use the key combination
KVM switch on the workstation monitor.

Structure of the on-screen display

The menu views of the on-screen display consist of three main areas.
 The header shows the name of the KVM switch and the title of the opened
menu.
 The shows the computers you can access or the menu items of the opened
list field 
menus.
 The shows the most frequently used keys to operate the opened menu.
footer
21 · G&D DP1.2-MUX3-ATC
Hotkey+Num
SELECT CPU
CPU 11
CPU 2
CPU 3
F9: Operation
F12:Service
(default: Ctrl+Num
F11:Config
) to open the OSD of the

2

3
