Dab/Dab+ Mode - Trevi DAB 7F90 R Handbuch

position number);
- If the preset number is empty, "Preset Empty" is shown.
- If the position is saved with station, station frequency is shown.
2. Press > (4) or < (9) button to select the desired memory location;
3. Press SELECT button (3) once to confirm and save the selected station.
To listen to a present station:
- Press PRESET button (10) once;
- Press the > (4) or < (9) button for selecting your desired station;
- Press SELECT button (3) to confirm.
FM TRANSMISSION INFORMATION
In FM mode, the display will show information about the current radio
station.
1. Press the INFO/MENU button (8) to change the displayed information.
Note: Not all DAB stations provide the information displayed by the device.
RDS info: displays information about the song broadcast (artist, track
title, etc...).
PTY, Program Type: Displays information about the FM station.
Transmitter Name: displays information about the sender of the
service.
Time/Date: displays information relating to the hours and date of
the current transmission.
Number/ transmitter frequency: displays the transmission frequency.
Reception: displays whether the reception is Mono or Stereo.

DAB/DAB+ MODE

Auto Scan
1. Adjust the antenna extension and angle to have the best reception;
2. Press POWER button (12) to switch ON the unit;
3. The first time the radio is powered and switched on, it will automatically
select DAB mode and start a quick scan of the DAB channels to search
for available stations. Please leave it to complete this process;
4. Press > (4) or < (9) button to select desired station;
Note:
- You may have to wait for the unit to tune into the new channel.
- In DAB mode, the date and time of the device are synchronized with those
of the station being listened to.
5. Press SCAN button (5) can fully scan the available channels again.