Selecting A Sound Profile - Silvercrest SNL 15 B1 Bedienungsanleitung Und Sicherheitshinweise

NOTE
► If you want to connect the currently connected speaker to another
Bluetooth
briefly at the same time to disconnect the currently connected
Bluetooth
activate the Bluetooth
device. You will then hear a short beep and the operating LED 6
flashes white rapidly. The speaker is now ready to be paired with
another Bluetooth
Selecting a sound profile
You can choose between three sound profiles "Music", "Movie" and
"Voice".
♦ Press the
NOTE
► If you switch off the speaker, the set sound profile is still active
when you switch it on again.
The following acoustic signals can be heard when the corresponding
sound profile is selected:
Sound profile
Music
Film
Voice
SNL 15 B1
device, start by pressing the
®
device from the speaker. Alternatively, you can de-
®
®
device.
®
button 0 repeatedly to switch between the profiles.
function on the connected Bluetooth
Acoustic signal
1 × beep
2 × beeps
3 × beeps
8 and 9 buttons
GB │ IE │
31
®
■