IKEA SYMFONISK Betriebsanleitung Seite 12

Removing surround speakers
1. Go to More -> Settings -> Room Settings.
2. Select the room the surround speakers are in. The room name appears as Room
(+LS+RS) in Room Settings.
3. Select Remove Surrounds.
4. Select Next to drop the surround sound speakers from your surround system.
If these were newly purchased SYMFONISKs they will appear as Unused on the
Rooms tab. If these SYMFONISKs existed in your household previously, they revert
back to their previous state.
You can now move them to another room for individual use.
Changing the surround settings
The default setting is determined by the calibration process. If you wish to make a
change, you can follow the steps below.
1. Go to More -> Settings -> Room Settings.
2. Select the room the surround speakers are located in. It appears as Room (+LS+RS)
in Room Settings.
3. Select Advanced Audio -> Surround Settings.
4. Choose one of the following:
Surrounds: Choose On or Off to turn the sound from the surround speakers on
and off.
TV Level: Drag your finger across the slider to increase or decrease the volume of
the surround speakers for playing TV audio.
Music Level: Drag your finger across the slider to increase or decrease the volume
of the surround speakers for playing music.
Music Playback: Choose Ambient (default; subtle, ambient sound) or Full (enables
louder, full range sound). This setting applies only to music playback, not TV audio.
Balance Surround Speakers (iOS): Select Balance Surround Speakers and follow
the prompts to manually balance your surround speaker levels.
12