Replacing The Pilot Burner Nozzle; Commissioning - ALI Proxe 70 Serie Anweisungen Für Installation, Gebrauch Und Wartung

REPLACING THE MAIN BURNER NOZZLE AND
ADJUSTING THE PRIMARY AIR FLOW.
•
Remove the control panel.
•
Loosen the screws V1.
•
Remove the nozzle-support manifold.
•
Slacken screw V.
•
Remove nozzle UM and replace it with the one indicated
in table T1.
•
Retighten nozzle UM.
•
Adjust air regulator Z to distance A as shown in table T1.
•
Retighten screw V fully.
•
Re-assemble all parts. For assembly, proceed in reverse
order.
26
Instructions for installation

REPLACING THE PILOT BURNER NOZZLE

•
Remove the control panel.
•
Undo connector R.
•
Remove nozzle UP and replace it with the one indicated
in table T1.
•
Retighten the connector R. Re-assemble all parts.
•
For assembly, proceed in reverse order.

13. COMMISSIONING

See Chapter " INSTRUCTIONS FOR MAINTENANCE".