Getting Started; Bluetooth Mode - Sharp GX-BT480 Bedienungsanleitung

Behind the port cover
11. MicroUSB Charge slot – please use supplied AC charger and USB
cable, charge time up to 3.5 hours.
12. Micro SD card slot – up to 32GB card supported MP3, WAV, APE,
FLAC audio formats, card sold separately
13. Aux in Jack 3.5mm – Aux in cable supplied
14. Carry strap hooks for use with supplied carry strap.

Getting started

Power on/off
Short press button to power on/off the speaker.
The indicator light will fl ash blue. The speaker has a memory
function and when powered will enter the same mode as prior
to power off. Each time the speaker powers on it will reset to
25% volume.
After 10 mins with no activity/connection the GX-BT480 will
automatically power off to conserve battery.
Charging
Please use supplied AC charger and USB cable to charge the GX-
BT480. A full charge will take around 3.5 hours. Please close the
port cover after you have charged the GX-BT480.
EU US
Modes

Bluetooth Mode

A. Pairing
Power on the speaker and enter Bluetooth mode. The light
indicator will fl ash. On your smartphone search Bluetooth
devices for the "SHARP GX-BT480". Once connected the
speaker will announce it is "connected" and the indicator
light will cease fl ashing.
B. Music
► Click to play/pause
Click for previous track
14
11
12
13
AU UK
Click for next track
Click to decrease volume
Click to increase volume
C. Calls
► Click to answer an incoming call
► Click to end the active call
► Double click to reject an incoming call
D. SIRI/GOOGLE
► Double click to activate/cancel Siri/Google voice dialing.
E. Disconnect
► Press and hold to disconnect the current Bluetooth
connection. The GX-BT480 will prompt "disconnected".
Then other Bluetooth devices can fi nd and pair with the
GX-BT480.
Duo Mode
Dual speaker wireless stereo pairing for wide stereo sound stage.
1. Press the power button on the rst speaker to turn the speaker "On"
2. Press and hold the M (mode) button on the rst speaker until the
speaker says "Duo Mode pairing" then release the buttons
3. Press the power button on the second speaker to turn the speaker
"On"
4. Press and hold the M (mode) button on the second speaker until the
speaker says "Duo Mode pairing" then release the buttons
5. Please wait until one speaker says "Duo Mode connected".
This may take up to 1 minute. The speakers are now connected to
each other.
6. The speaker that says "Duo Mode connected" is the master speaker
and this is the speaker that you should pair with your phone.
For Bluetooth pairing to a Bluetooth-out enabled smart device search
for "GX-BT480" on your device and pair.
If you receive a phone call while in Duo Mode the call will only come
through the master speaker.
When in Duo Mode and you Power off one speaker both speakers will
power o .
When you Power on the speakers, they need to be turned on individual-
ly.
When both speakers are powered on Duo Mode will automatically
reconnect and you will hear "Duo Mode connected".
To disconnect Duo Mode press and hold the M (mode) button on one
speaker until you hear "Duo Mode disconnected".
To clear Duo Mode pairing press and hold the M (mode) button on
one speaker until the speaker says "Duo Mode cleared". This takes about
8 seconds.
Assuming direct line of sight, you should achieve be able to achieve a
range of over 40 metres between the two speakers. When used indoors,
the range will be a ected by any internal walls or obstacles between
the speakers.
Micro SD Card Mode
When you insert a Micro SD Card into the GX-BT480 it will
switch to Micro SD card playback and announce memory card
playback. Please press the play button to commence playing
music from the card.
Please note the GX-BT480 supports Micro SD cards upto 32GB,
FAT32 format and MP3, WAV, APE, FLAC audio formats.
If you wish to switch modes please press the
► Click to play/pause
Click for previous track
Click for next track
Click to decrease volume
Click to increase volume
EN
button.