Hama Elegance Pro 00186317 Bedienungsanleitung Seite 3

• After approx. 5-10 minutes (depending on how quickly the radio signal was received), the hands will
set themselves to the correct time.
5.2. Setting the time manually
• If the correct time has not been set after approx. 10 minutes, this means the clock could not nd
a DCF signal.
• Press and hold the M.SET button to manually set the correct time. Release the M.SET button once
you have reached the required time.
• The clock automatically continues to search for the DCF signal on a daily basis. If the signal is
received successfully, the manually set time is overwritten.
• You may need to change the installation location and avoid areas with possible sources of interfer-
ence (cordless and mobile telephones, wireless speakers, etc.).
5.3. Starting manual reception
• Once the clock is running, press the REC button for 3 seconds. This will set the hands to the 12:00
position. Now the clock starts searching for the DCF signal.
• If no signal has been received, the clock will show the time previously saved.
5.4. Alarm
Setting the alarm
• Move the setting wheel on the back of the alarm clock to set the required alarm time.
• To activate/deactivate the alarm, move the slide switch to the ON or OFF position.
• The status indicator next to the third digit is red when the alarm is activated and green when it is
deactivated.
Stopping the alarm/snooze function
• If the alarm is activated, it is triggered at the set time and an alarm signal sounds for two minutes
with increasing volume. The alarm automatically stops after this time and is then triggered again
at the set alarm time.
• To stop the alarm early, move the slide switch to the OFF position.
• Move the slide switch back to the ON position to activate the alarm for the set alarm time.
Note – Snooze function
• While the alarm signal is sounding, press the SNOOZE/LIGHT button to activate the snooze
function. The alarm signal will be stopped for 5 minutes, after which it will sound again.
• The snooze function can be activated six consecutive times.
5.5. Backlight
• If you press the SNOOZE/LIGHT button, the clock face will light up for approx. 5 seconds.
3