Control Panel; Dmx Mode - afx light LEDSCAN60 Bedienungsanleitung

1. AC socket

2. Control panel

Use control panel to choose operating mode, to set DMX address or to set parameters
3. DMX In
4. DMX out
5. Mounting bracket
6. Power switch
7. Miror
8. Lens
If the projection of the gobo is blur, adjust the focus in turning the lens.
CONTROL PANEL
Press the MENU button repeatedly until you reach the desired menu function. Use the UP and DOWN buttons to
navigate the menu options and press ENTER button to validate your choice..To return to the previous option or menu
without changing the value, Press MENU the button.
MENU
A001
SoU1
SoU2
SLoU
FASt
rPAN
rTlt
P255
LEoN
LoFF
Rest
Load

DMX MODE

- Set devices in DMX mode in choosing DMX address for each unit
- If you want to control all unit in same time, set the same DMX address for all devices. If you want to control
separately each device, enter different DMX addresses for each unit
© Copyright LOTRONIC 2014
DMX Address : Use UP and DOWN pour set DMX address
Sound active mode 1
Sound active mode 2
Slow running mode
Fast running mode
Pan move reverse
Tilt move reverse
Auto program speed ( Use Up and Down to set speed )
4 digital LED full all time
Auto off display no any operation about 1mn
Reset factory
Powering the unit on initially
DESCRIPTION
LEDSCAN60 Page 4