Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Contents
1.
Definitions
1.1
Delivery content
2.
Safety instructions
3.
3.1
Preparing the handheld transmitter
3.2
Preparing the mode
3.3
Smooth start
3.4
Deep discharge protection
4.
4.1
4.2
4.3
BEC / running without BEC
4.4
4.5
Active freewheeling circuit
4.6
4.7
4.8
4.9
4.11 Autorotation AR (Bail-out)
1. Definitions
APM
Auto-Programming-Mode
EMK
Electromotive force
AR
Autorotation/Bail-out
BEC
Battery Eliminating Circuit to power
the receiver from the main battery)
KOSMIK
KOSMIK ESC
Button
control knob for mode programming
LED
Active light / control
Mode
Operating mode / program
Parameter variable value
Pitch
Blade angle (rotor blade) top side
see picture in section 5 bottom see
picture in section 5
ProgUNIT PROGDISC or ProgUNIT
1.1 Delivery content
1.
1 x KOSMIK ESC
2.
1 x 200 A electric fuse
(Including fixation)
3.
2 x BEC cable
4.
1 set battery cables
(2 pieces - red / black) one sided with wire-
terminals wired, stripped and tinned on the
other side
5.
1 set motor cables
(3 pieces - Yellow) one sided with wire-
terminals wired, stripped and tinned on the
other side
6.
5 x screw (M5 x 10 mm)
7.
5 x self-retaining nut (M5)
8.
10 x washer (M5)
9.
5 x shrinking tube
5.
Connecting the cables
5.1
BEC cables (connection to receiver)
14
5.2
Motor cables
14
5.3
Sensor plugs
15
6.
Starting
15
6.1
Function range for ESC-modes
15
7.
15
7.1
Mode 1 - APM
15
7.2
Mode 2 - Glider (with brake)
16
7.3
Mode 3 - Motor flight / Boat (without brake) 20
16
7.4
Mode 4 - Helicopter
16
7.5
17
7.6
Mode 10 - BEC Voltage adjustment
17
8.
17
9.
17
10.
17
11.
Technical assistance, Advice, Hotline
17
17
17
12.
18
12.1 Routing cables on ESC
18
13.
Messages and their results
2. Safety instructions
KOSMIK is a product that is designed
exclusively
!
Under
KOSMIK be used in manned applications!
Always ensure sufficient cooling in order
to prevent overheating of the ESC. If
!
necessary a heatsink is to be mounted to
the KOSMIK's top side!
• For safety reasons, the KOSMIK is always to
be operated with a properly sized fuse within
the battery circuit. A corresponding 200 A fuse
is included with your KOSMIK.
• When connecting the motor and battery to the
ESC, it is very important to keep a sufficient
safety distance from all moving parts of the
device (such as rotors or propellers). Misuse
or electronic defects may result in an
unintended motor start. A prematurely starting
motor, with connected devices such as rotors
or propellers, may cause considerable
injuries.
Only use the ESC when property and
!
personal belongings are out of harm's way.
To prevent damage of the ESC, or other
components, always use the designated
!
mounting brackets.
Do not use cables ties for installing the
ESC in the model!
• The ESC must not be disconnected from the
battery during operation.
• Electrostatic discharge may damage the ESC.
Ensure adequate grounding if necessary.
for
model-flight
no
circumstances
18
18
19
19
20
20
18
20
20
21
22
22
23
23
24
25
25
25
26
26
27
operation.
should
the
13
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
