Installing The Batteries - Samsung SR8950 Benutzerhandbuch

■
Charger (Station)
Power lamp Power lamp
(red) (red)
Front
■
VIRTUAL GUARD
Distance Detection Sensor Distance Detection Sensor
■

Installing the batteries

Batteries are not supplied with the product. You have to purchase the batteries separately. Install
the alkaline batteries (type D) before use.
1 1
Lift the cover of the VIRTUAL
GUARD while pressing the
locking tab.
Charging lamp (green) Charging lamp (green)
Cord winder Cord winder
Charging Charging
terminals terminals
Lamp Lamp
2 2
Install the batteries into the
VIRTUAL GUARD as shown
by the fi gure below. (If the
batteries are installed with
the incorrect polarity, the
VIRTUAL GUARD will not
work.)
❈
Back
Power Button Power Button
Main Body Detection Sensor Main Body Detection Sensor
3 3
After inserting the tip of the
cover into the slot, push the
other end to close it until it
clicks into place.
Specifi cation: Alkaline Type D (LR20) batteries
assembling _17