Mains Power Operation; Battery Operation - Auriol HG06061A-DCF Bedienungs- Und Sicherheitshinweise

Mains power operation:

Plug the mains adapter plug
the connector socket
mains adapter

Battery operation:

Open the battery compartment
by removing the battery compartment cover
Insert two type AA batteries into the battery compartment
as shown.
Close the battery compartment
Once the power supply has been established, the display will
light up and go through a brief check of the display elements.
The weather station will now attempt to connect to the outdoor
sensor. The reception symbol
panel .
3
Note: If no outdoor temperature is displayed within around
3 minutes, the weather station will stop the reception search.
The reception symbol
on the outdoor temperature panel
It is possible that no signal can be received due to the surrounding
buildings or because the distance is too great.
If you are unable to establish an automatic connection to the
outdoor sensor, you can do this manually:
Press and hold the – / CH button
flashes on the outdoor temperature panel
48 GB/IE
16
on the weather station and connect the
13
to an easily accessible mains plug.
14
flashes on the outdoor temperature
goes out and
on the mains adapter
on the rear of the device
12
15
again.
12
and
.
3
until the reception signal
9
3
into
14
.
12
are displayed
.