Changing From Jigsaw To Sabre Saw; Installing/Changing The Saw Blade; Inserting/Removing The Rechargeable Battery - Parkside PSSSA 20-Li A1 Originalbetriebsanleitung

Removing the slide shoe
1. Press the slide shoe (5) by the notches
(5.1) from the baseplate (6).
2. Pull the slide shoe (5) forward, away
from the baseplate (6).
Changing from jigsaw
to sabre saw
Remove the battery from the
device to prevent accidental
operation. Risk of injury!
Jigsaw to sabre saw:
1. Remove the slide shoe (5) (see
"Attaching/removing the slide shoe").
2. Press the release button (1) and unfold
the power tool
3. Let go of the release button (1) and
unfold the power tool to a 90° angle
until there is an audible click.
Installing/changing
the saw blade
Caution! Risk of injury!
- Do not use any blunt or bent bla-
des or blades which are dama-
ged in any other way.
Wear protective gloves when
attaching the saw blade.
Risk of injury when touching the
saw blade.
Only saw blades with
a holder identical to the
supplied saw blades
(4.1/4.2/11.1/11.2) can be
used. Risk of injury!
Be sure to always use the correct
saw blade for the material.
You will fi nd the spare saw blades
in "Spare Parts/Accessories".
Installing the saw blade
Make sure that the saw blade holder is
free of splinters or other material residue.
1. Turn the quick-release lock (8) as far to
the left as possible and hold it fi rmly in
this position.
2. Insert the saw blade (4.1/4.2/
11.1/11.2) into the chuck (7).
Make sure that the saw blade
(4.1/4.2/11.1/11.2) is attached cor-
rectly and the teeth are pointing in the
cutting direction.
3. Release the quick-release lock (8).
4. Check that the saw blade is secure by
pulling on it.
Removing the saw blade
1. Turn the quick-release lock (8) as far to
the left as possible and hold it fi rmly in
this position.
2. Remove the saw blade (4.1/4.2/
11.1/11.2) from the chuck (7).
3. Release the quick-release lock (8).
Inserting/removing the
rechargeable battery
1. To insert the battery (14), push the bat-
tery (14) along the guide rail into the
device. You will hear it click into place.
2. To remove the battery (14) from the
device, press the release button (13)
on the battery and pull the battery (14)
out.
Only insert the battery once
the battery-operated tool is
fully ready for use.
GB IE
29