Reading The Filter Operating Hours Counter; Setting And Altering The Grease Filter Operating Hours Counter - Miele DA 119 Gebrauchs- Und Montageanweisung

Operation
Reading the filter operating hours
counter
To check the percentage of time set
already used:
^ Switch the fan on with the joystick.
^ Press the grease filter or the charcoal
filter touch control.
One or several of the power level touch
control lights will flash.
The number of flashing lights shows the
percentage of the operating time which
has already been used up.
1 light = 25 %
2 lights = 50 %
3 lights = 75 %
4 lights = 100 %
The number of operating hours used
remains in the memory, even when the
appliance is switched off or there is a
power cut.
44
Downloaded from www.Manualslib.com manuals search engine
Setting and altering the grease filter
operating hours counter
You can set the operating hours
counter to suit the type of cooking you
do.
– Select a short time if you roast or fry
a lot.
– If you use very little fat for cooking,
select a longer time.
– If you only cook occasionally we
recommend that you select a short
time, because grease which has built
up gradually over a long period of
time will harden on the grease filters
and make cleaning more difficult.
Altering the filter operating hours
counter
The operating hours counter for the
grease filter is set to 30 hours. This can
be lengthened or shortened. You can
choose 20, 30, 40 or 50 hours.
^ Switch the fan on with the joystick.
^ Press the run-on option touch control
and the grease filter touch control at
the same time.
The indicator light for the grease filter
touch control and one of the lights for
the power level touch controls will flash.