Unold 86940 Bedienungsanleitung Seite 20

5. Press the „ON/OFF" button once. The appliance starts. In the basic setting
the appliance runs at low speed in normal mode.
Setting the speed
6. Press the „Speed" button until the appliance is working at the desired
speed. The setting is shown by the respective indicator light:
Low speed
Medium speed
High speed
Swing function/oscillation
7. Press the „Oscillation (Swing)" button to switch on the swing function.
Press the button again to stop the appliance in the current position, the fan
however continues to run.
Timer
8. Via the Timer button you can select the desired runtime of the appliance.
This is possible in the range from 1 hour to 8 hours. Press the „Timer" but-
ton until the desired number of hours appears in the display. After this time
elapses the appliance switches off automatically. If you do not make a time
setting, the appliance will run continuously.
Setting the mode
Press the „Mode" button and select the desired operating mode. You can
select Standard mode or Near Natural mode (the appliance works with
alternating speeds that feel like the natural movement of air). Press the
„Mode" button repeatedly until the desired setting is shown through the
appropriate indicator light.
Switching off
9. Press the „ON/OFF" button again or the „ON/OFF" button on the remote
control unit to switch off the appliance. When you are no longer using the
appliance, unplug the plug from the electrical outlet.
20
Copyright UNOLD AG | www.unold.de
green
orange
red