Bostitch SL1838BC-E Technische Gerätedaten (Übersetzung Des Originals Seite 7

© BOSTITCH 2019
"DIAL-A-DEPTH™" FASTENER CONTROL
ADJUSTMENT (FIG 10)
GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE
The DIAL-A-DEPTH™ Fastener Control adjustment
compliance for the products.
feature provides close control of the fastener drive
depth; from flush with the work surface to shallow or
FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en
deep countersink. First, set the air pressure for
consistent drive in the specific work, then use the DIAL- rien que les produits soient conformes aux normes CE.
A-DEPTH™ Fastener Control adjustment to
give the desired depth of drive.
DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht
die CE-Richtlinien für Produkte.
ACTUATION MODE
NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet
m Warning! Always disconnect air supply before making
zeggen dat de producten voldoen aan de CE-vereisten.
adjustments as accidental actuation may occur, possibly
causing injury.
DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for
produkterne.
SELECTABLE ACTUATION SYSTEM - ALL MODELS
These models feature a selectable actuation system that
FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille CE-
allows the user to choose between the following modes
yhdenmukaisuutta.
of operation.
m WARNING! Tools marked with this symbol
GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα
have either contact actuation, continuous
αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.
contact actuation or selectable actuation
with contact actuation selected.
IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la
WHEN IN CONTACT ACTUATION MODE:
conformità CE per i relativi prodotti.
These tools are designed for use in production
applications such as pallets, furniture,
NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke kravene for
manufactured housing or upholstery.
CE-merking for produktet.
DO NOT use for applications such as closing boxes
or crates and fitting transportation safety systems
PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão em
on trailers and lorries. This tool shall only be used in
safe working places. Care must be taken to prevent
conformidade com a CE para os produtos.
accidental actuation when changing from one
working position to another.
ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
SEQUENTIAL ACTUATION
SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
The sequential actuation requires the operator to hold
conformidad con las normas CE de los productos.
the tool against the work with the safety yoke depressed
before pulling the trigger. In order to drive additional
PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu
fasteners, the trigger must be released and the tool
lifted away from the work, before repeating the above
nie stanowią deklaracji zgodności CE prezentowanych produktów.
mentioned steps.
CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu
This makes accurate fastener placement easier, for
instance on framing, toe nailing and crating applications.
nie stanowią deklaracji zgodności CE prezentowanych produktów.
The sequential actuation allows exact fastener location
without the possibility of driving a second fastener on
SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE pre dané
recoil, as described under Contact Trip (below). The
výrobky.
sequential actuation tool has a positive safety advantage
because it will not accidentally drive a fastener if the tool
HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül sokszorosított dokumentum nem
is contacted against the work - or anything else - while
the operator is holding the trigger pulled.
jelenti a termék CE-megfelelőségét.
RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document nu reprezintă
conformitatea CE pentru produse.
CONTACT ACTUATION
The common operating procedure on "Contact
actuation" tools is for the operator to actuate the
safety trip while keeping the trigger pulled, thus driving
a fastener each time the work is contacted. This will
allow rapid fastener placement on many jobs, such as
sheathing, decking and pallet assembly. All pneumatic
tools are subject to recoil when driving fasteners.
The tool may bounce, releasing the safety yoke and
if unintentionally allowed to re-contact the work
surface with the trigger still actuated (finger still
holding the trigger pulled) an unwanted second
fastener will be driven.
SELECTING THE ACTUATION MODE (FIG 11):
To change the trip mode, rotate the mode switch in the
counterclockwise direction. The mode switch will lock
automatically when the indicating arrow is pointing down
to the 3 nail icon stamped into the tool frame (Contact Trip
Mode) or to a single nail icon stamped in the tool frame
(Sequential Trip Mode).
GB
7