English; Introduction; Controller Spin Pro - Jeti SPIN pro Serie Handbuch

SPIN SPIN

English

1. Introduction

The series SPIN pro controllers are successors of the former brushless series SPIN
controller family. The new line with the attribute PRO offers in comparison with the
predecessors increased adjustment possibilities like automatic motor timing, directly in
volts practicable shut-off voltage adjustments, tuning of start-up properties for different
motor types as well as new possibilities of mode activation for setting up autorotation of
helicopters. The power range of SPINpro controllers is the same as provided by the former
SPIN family ranging from 11A to 300A.

1.1 Controller SPIN pro

All controllers (except OPTO types) contain a new type of voltage regulator for supplying
the receiver and servos, the so called switched BEC. Owing to this element, a considerable
increase of applicability of controllers with BEC towards higher numbers of flight battery
cells could be achieved. Another advantage is the independence of number of servos from
the input voltage.
Basic parameters of SPIN controllers with BEC:
Type
SPIN 11 pro
SPIN 22 pro
SPIN 33 pro
SPIN 44 pro
SPIN 55 pro
SPIN 66 pro
www.modellmarkt24.ch www.modellmarkt24.ch
Sustained Input
current Voltage
[A] [V]
11 5 - 17
22 5 - 17
33 5 - 21
44 5 - 26
55 5 - 34
70 5 - 26
PRO PRO
BEC BEC Dimensions
[A] [V]
2,5 5,5
2,5 5,5
3 5,5
5 5,5
5 5,5
5 5,5
17
Weigt
[mm] [g]
32x23x6 12
32x23x7 26
42x23x7 32
52x25x10 44
52x25x12 60
52x25x12 56