Toro TimeCutter MX 4275T Bedienungsanleitung Seite 37

Servicing the Foam Air-Cleaner
Element
Service Interval: Every 25 hours/Monthly (whichever
comes first)—Clean the air-cleaner
foam element (more often in dusty,
dirty conditions).
Every 100 hours or yearly, whichever comes
first—Replace the air-cleaner foam element
(more often in dusty, dirty conditions).
1. Wash the foam element in liquid soap and
warm water. When the element is clean, rinse
it thoroughly.
2. Dry the element by squeezing it in a clean cloth.
Important:
Replace the foam element if it
is torn or worn.
Servicing the Paper Air-Cleaner
Element
Service Interval: Every 100 hours or yearly,
whichever comes first—Replace the
paper air-cleaner element (more
often in dirty or dusty conditions).
1. Clean the paper element by tapping it gently to
remove dust.
Note:
If it is very dirty, replace the paper
element with a new one.
2. Inspect the element for tears, an oily film, or
damage to the rubber seal.
3. Replace the paper element if it is damaged.
Important:
Do not clean the paper filter.
Installing the Air Cleaner
1. Install the foam element over the paper element.
Note:
Ensure that you do not damage the
elements.
2. Align the holes of the filter into the manifold
ports.
3. Rotate the filter down into the chamber and fully
seat it against the manifold
4. Close the cover.
35
(Figure 38).
Figure 38
g228022