IM_Sinus_Ultra_9611031_D-GB-F-PL:IM_Sinus_
Problems and Remedies
Problem/fault
The device is
plugged in
but the red
operating light
is not on.
The item to be
cleaned is still
dirty.
24
Possible cause(s)
The device is not
plugged in or not
properly plugged in.
Device has not been
switched on.
No power supply.
The mains cord is
faulty.
There is no water, or
not enough water in
the tank.
No cleaning product
added.
11.08.2010
Remedy
Insert the plug firmly in the
socket.
Press the On-/Off button
for the timer
.
If necessary, have the
220-240 V ~ socket into
which the device is plugged
or the installation checked
by an electrician.
Send the device to the
Service Center (for address,
see page 27).
Add water to the tank
until it reaches the "MAX"
mark.
Add a cleaning product
depending on type of dirt
(see on page 21/22).
11:12 Uhr
S