Inhaltsverzeichnis
Werbung
HoW to AVoID DAMAGe to Your VALuABLe SPeAKerS
All Magnat loudspeakers are designed and built for optimum sound reproduction with the tone controls
in the central position – i.e. with unaltered or "linear" amplifier output. higher settings of the tone controls
increase the amount of energy supplied to the loudspeakers. This may lead to speaker damage, at high
volumes.
uSe tHe VoLuMe controL WItH cAre!
If the output of your amplifier is significantly higher than the rated power handling capacity of your
speakers extremely high volumes can physically destroy your speakers. This doesn't actually happen
often but you should be aware that it is possible.
Weak amplifiers with low output ratings can actually be more dangerous for your speakers at medium volumes.
This sounds strange but the reason is quite simple: Weak amplifiers get overloaded much faster than powerful
ones and this causes measurable and audible distortion, which is more dangerous for loudspeakers than
anything else.
Always turn the volume down immediately as soon as you hear distortion! If you like listening to loud
music make sure that your amplifier can deliver at least as much power as the speakers' power-handling
rating.
SPecIfIcAtIonS
Configuration:
Power handling capacity RMS / Max.:
Impedance:
Frequency range:
Cross-over frequency:
Recommended amplifier power:
Efficiency (2.8 V/1 m):
Dimensions (WxhxD):
Weight:
Configuration:
Output power RMS/Max.:
Frequency range:
Cross-over frequency:
Dimensions (WxhxD):
Weight:
Accessories:
SuBJect to tecHnIcAL cHAnGe
front / rear
Two-way
50/100 watts
4 – 8 ohm
90 – 32 000 hz
5000 hz
> 15 watts
88 dB
90 x 110 x 110 mm
0.9 kg
Subwoofer
bass reflex, downfire
40/100 watts
32 – 200 hz
50 – 150 hz, adjustable
225 x 380 x 350 mm
8.5 kg
mains cable
11
centre
Two-way
60/120 watts
4 – 8 ohm
80 – 32 000 hz
5000 hz
> 15 watts
89 dB
210 x 90 x 110 mm
1.6 kg
Werbung
Inhaltsverzeichnis
