Snooze Function; Temperature And Humidity - Explore Scientific WSH4005 Bedienungsanleitung

TURN ON/OFF ALARM
Press [ SET ] to display the alarm time. Press the
[ UP ] or [ DOWN ] button to turn on/off the alarm.

SNOOZE FUNCTION

1. At the set time, alarm signal rings.
2. During the alarm, press the [ SNZ / LIGHT ]
button to delay the alarm by 5 minutes.
3. To stop the alarm, press any other button, except
for [ SNZ / LIGHT ] button.
4. The alarm will start again at the next alarm time,
unless you turn off the alarm function by pressing
the [ SET ] button to display the alarm time first,
then press the [ UP ] or [ DOWN ] button until the
alarm is set to off.
WEEK DISPLAY
The first two letters are displayed.

TEMPERATURE AND HUMIDITY

The indoor temperature is always displayed in
the right bottom corner of the screen. To receive
outdoor temperature you can connect up to 3
outdoor sensors to the main unit.
6
MANUAL MEASUREMENT DISPLAY
1. Press [ MAX/MIN ] button to display the max.
and min. temperature.
2. Display order: Current values > MAX (highest
values) > MIN (lowest values)
3. When displaying highest or lowest values, press
and hold [ MAX/MIN ] button to delete all saved
values.
TEMPERATURE TREND INDICATION
When the temperature rises by 1°C / 2°F, the up
arrow icon [ ] appears.
When the temperature drops by 1°C / 2°F, the
down arrow icon [
NOTE: The trend compares the current data with
the data measured 3 hours before. Data is
recorded every 30 minutes.
WEATHER FORECAST
This device calculates a weather forecast for the
next 12 hours on basis of the measured values.
It has 6 kinds of dynamic weather forecast.
SYMBOL
] appears.
DESCRIPTION
Sunny
Partly Sunny
Cloudy
Rainy
Stormy
Snowy