setup & application
Various Screen Settings
❖ To rotate the image
You can rotate the image on the screen.
Each time you press the [h] button on the remote control, the image will be rotated by 90°. (90°,
180°, 270°, back to 0°)
J
In the image rotation mode (90°, 180°, 270°), the OSD information and menus are not displayed.
❖ To save and pay the image
1. Save
Press the [f] button on the remote control and enter a number button (1~8) in less than 4
seconds.
2. Play
• To play an image of your choice
Press the [g] button on the remote control and enter a button number (1~8) in less than 4
seconds.
• To play all of the stored images one after the other
If you press and hold the [g] button on the remote control, the images will be played one by
one in sequence.
J
The images will disappear automatically if the digital presenter is turned off.
The saving operation will be disabled in Freeze or Rotate mode.
❖ To play both Live image and any of the stored images on the same screen
You can split the screen in two: one for the Live screen under monitoring, and the other for the stored
image.
• To play in a split mode
Press the [ a ] button and enter a number button (1~8) in less than 4 seconds.
• To move the stored image
The stored image will be played in the left. As the stored image occupies the left half of the screen, use
the [ b ] buttons to scroll through the whole image by 1/3 of the view area.
46_
setup & application