Mainboard D2628
Choose Proper Parts for Your System
Before you installing a system with this motherboard, make sure your major system parts meet the
following basic guidelines and requirements:
Central Processor Unit (CPU) Considerations
●
Process Type and Package
D2628 supports Dual-Core Intel® Xeon® Processors in LGA 1366 socket. Xeon® Processors
with 6 cores are only supported for Cxx board version.
●
Quick Path Interconnect (QPI)
The processor host bus, or called Quick Path Interconnect (QPI), auto-operates at a frequency
up to 6.4 GT/s.
●
Single/Dual Processor System
D2628 board supports one or two Dual-Core or Quad-Core or 6 core (only Cxx board version)
Intel® Xeon® Processors.
Single Processor System:
When only installing a single processor on D2628, the processor must be installed in the CPU0
socket.
Dual Processor System:
D2628 supports dual processor configurations only in which both processors operate with the
same QPI frequency, core frequency, and have the same internal cache sizes. Mixing
processors operating at different QPI frequency, core frequency, or cache sizes may cause
system non-operation or damages on processors and/or the motherboard.
System Memory Interface
●
Technology
DDR3 800/1066/1333 unbuffered single rank or dual rank DIMM modules with or without ECC
Any combination of x8 UDIMMs, with 1Gb or 2Gb DRAM density supported.
DDR3 800/1066/1333 registered single rank or dual rank DIMM modules with ECC.
DDR3 800/1066 registered quad rank DIMM modules with ECC.
●
Connector
240 Pin, 1.5 V, 64 Bit
Fujitsu Technology Solutions
English - 13
13