Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Install the safety bond by inserting the quick link in the attachment eyelet on the bottom of the base. Pull the
safety bond over the trussing system etc. Insert the end in the quick link and tighten the fixation screw.
The maximum drop distance must never exceed 20 cm.
A safety bond which already hold the strain of a crash or which is defective must not be used again.
Before taking into operation for the first time, the installation has to be approved by an expert!
(1) Omega-holder
(2) Clamp
(3) Safety-rope
(4) Quick-lock fastener
Screw the clamp via a M10 screw and self-locking nut onto the Omega-holder.
Insert the quick-lock fasteners of the Omega-holder into the respective holes on the
bottom of the device. Tighten the quick-lock fasteners fully clockwise.
DANGER TO LIFE!
40/60
00111396, Version 1.0
Werbung
Inhaltsverzeichnis
