Introduction; Explanation Of The Rating Plate Affixed To The Machine; Explanation Of The Pictograms; Explanation Of The Symbols - Sabo 43-ACCU VARIO Betriebsanleitung

1 INTRODUCTION

Dear Garden Lover,
Where pride in a trim lawn is coupled with a love of gardening, gardeners really
appreciate good gardening equipment. You have made an excellent choice in
purchasing your new lawn mower. It combines the power of a major traditional brand
with the innovations of modern high-tech. You will feel this when you are working with it
and be very pleased with the wonderful result.
Yet before you start work on your lawn, here is some important information which you
should always heed.
Before you start your mower for the first time, read this operation manual through
carefully to familiarise yourself with the correct operation and maintenance of the
machine and to avoid injury or damage to your lawn mower.
Read and note the separate operating instructions of the charger supplied as well, in
particular the safety information.
Use the lawn mower carefully. The pictograms on the equipment draw your attention to
the most important precautionary measures.
The safety instructions in this operating manual are marked with symbols.
The meaning of the pictograms and symbols is explained in the following chapters.
The terms "left" and "right" always refer to the left and right-hand side of the equipment
seen in the direction of movement.
Your mower will work reliably when the technical instructions are followed exactly. We
would like to point out that any damage to the mower caused by operating faults is not
covered by warranty / guarantee obligations.
We hope you enjoy cultivating your lawn.
2 EXPLANATION OF THE RATING PLATE AFFIXED TO THE
MACHINE
1 IP rating
2 Product identification number
3 Protection class III symbol
4 Rated speed
5 Model
6 Output
7 Rated voltage
8 This tool should not be disposed of with household waste. Tool,
accessories and packaging must be disposed of in an
environmentally friendly way
9 Weight
10 Symbol for DC voltage
11 CE conformity mark
12 Model year
13 Manually guided lawn mower
14 Guaranteed sound power level
15 Serial number
These operating instructions apply for the following models:
43-ACCU VARIO (SA521020): Cutting width 430 mm
47-ACCU VARIO (SA521520): Cutting width 470 mm
See the rating plate for the correct model designation for your equipment and the serial
number.
The section underneath a heading in italics and underlined applies up until the next
such heading for the respective model.

3 EXPLANATION OF THE PICTOGRAMS

Read and follow the operator's manual and safety instructions!
Risk caused by thrown elements when the motor is running –
Observe the safety distance / Keep all persons outside the
danger area!
Beware of sharp working blades. Avoid contact with the
rotating cutter bar Please make sure that hands and feet do
not get under the housing. – Switch the motor off and remove
the safety key before carrying out cleaning and maintenance
work.
Batteries and chargers should not be disposed of with
household waste.
Return the battery or the charger to your dealer or take them
to a public collecting point.
This appliance must not be disposed of as household waste. Send equipment,
accessories and packaging for environmental recycling.

4 EXPLANATION OF THE SYMBOLS

WARNING
Always read and follow the operating instructions and general safety
regulations carefully. Keep the operating instructions for reference
purposes.
Proper use also includes adherence to the operation, maintenance
and service conditions prescribed by the manufacturer.
WARNING
Keep all persons outside the danger area!
Contact with the rotating blade can cause severe injury.
Objects ejected at high speed can cause severe injury.
You must never mow the lawn if there are other persons nearby,
especially children or animals.
WARNING
Electric shock can lead to serious injuries.
The electrical equipment must not be modified.
Read and note the separate operating instructions for the battery and
charger!
Do not spray the device off with water. The electrical system could
become damaged.
WARNING
Electric shock can lead to serious injuries.
Never move over live wires when the cutting tool is switched on.
2
Start cutter motor:
1. Press on/off button to switch on the
standby mode.
2. Hold down upper switch bracket.
3. Press the on/off button again with 3
seconds.
Cutter motor and cutter start.
As long as the device is in standby mode
(step 1), step 2 and step 3 are enough to
start the cutter motor again.
Motors STOP
Release top switch bracket: Cutter motor
and cutter bar stop.
Release bottom switch bracket: Drive stops
and mower does not move.