Customizing Your V50X - AKASO V50X Handbuch

CUSTOMIZING YOUR V50X

Video Settings
1. Resolution: 4K30fps/2.7K30fps/1080P90fps/1080P60fps/1080P30fps/
720P120fps/720P60fps/720P30fps
Default setting is 4K30fps.
Note: When capturing video at high resolutions or high frame rates in warm
ambient temperatures, the camera may become warm and use more power.
2. Image Stabilization: OFF/ON
Default setting is off.
3. Gyroscope: OFF/ON
Default setting is off.
This setting adjusts the footage to offset motion during capture. The result is
smoother footage, especially in activities with relatively small but fast motion
including cycling, motorcycling, and handheld uses.
4. Video Encode: H.264/H.265
Default setting is H.264.
A video codec is an electronic circuit or software that compresses or decompresses
digital video. It converts uncompressed video to a compressed format or vice versa.
According to multiple studies, HEVC, High Efficiency Video Coding (H.265) should
deliver up to 50% better compression than H.264 in video on demand (VOD)
applications, which means better quality at half the bit rate. In live encoding, which
obviously has to be performed in real time, the initial expectations are a 35%
bandwidth reduction at similar quality levels. Alternatively, HEVC can also enable
larger resolution movies, whether 2K or 4K. In addition, encoding existing SD and
HD content with HEVC rather than H.264 will add to cost savings and/or the ability
to stream higher quality video to lower bit rate connections.
5. Slow Motion: 1080P90fps/720P120fps
Default setting is 1080P90fps.
Slow motion is an effect in film-making whereby time appears to be slowed down.
Note: If you want to record slow motion video, please turn off Image Stabilization first.
11