AUTOMATIC IDENTIFICATION OF SHEETS NOT COPIED
This feature is particularly useful when a jam occurs inside the copier while copying with the ADF.
In this case, the operator must remove the jammed paper, collect the originals from the original receiving
tray, stack them carefully (following the original sequence) and start copying again.
The photocopier is able to count the originals, identify the first sheet that has not been copied and start
copying again from this point.
SORTER 10 / SORTER 20 (E/F Back of cover)
The sorter can be used in two different modes by the operator, depending on the impagination
requirements.
In SORT mode (sorting in consecutive order), one copy of each original is delivered to a different bin,
keeping the correct numerical order of the pages.
With SORT/GROUP mode (sorting by groups), all copies of the same original are delivered to the same
bin.
COMPONENTS (Sorter 10 /E back of cover)
1. Handle
2. Bins for collecting the copies (Number of bins: 10)
COMPONENTS (Sorter 20 /F back of cover)
1. Handle
2. Bins for collecting the copies (Number of bins: 20)
SELECTING THE MODES: SORT
1. Press the SORT/GROUP/STAPLE-SORT key (A-4) until the
2. Set the required number of copies, using the NUMERICAL keys (A-31).
Note
If you set too many copies for the bins to contain (10 for Sorter 10 and 20 for Sorter 20), the copier
will automatically correct the setting (to 10 or 20) to match the type of sorter selected.
3. Press the PRINT key (A-30).
SELECTING THE MODES: GROUP
1. Press the SORT/GROUP/STAPLE-SORT key (A-4) until the
2. Set the required number of copies, using the NUMERICAL keys (A-31).
20
chap1.p65
Downloaded from
www.Manualslib.com
20
manuals search engine
indicator lights up.
indicator lights up.
01/02/00, 10.42