power on and volume control
tUrning tHe POWer On/Off
1. To turn on this unit, touch any button on the unit's front panel when the unit is in Standby mode.
or,
Press POWer on the remote control.
2. To turn off this unit, touch the +# button on the unit's front panel for more than 3 seconds.
or,
Press POWer on the remote control again.
▪
▪
aDjUsting tHe VOLUMe
DC 12V 2A
AUX IN
ONLY FOR SERVICE
Use +, - buttons to adjust the volume. As you adjust the volume, the Input mode LED blinks.
The LED remains on in case you increase the volume when it has already been set to maximum, or decrease the
volume when it has already been set to minimum.
Touch the +/– button on the right side of the front panel.
or,
Press vOl +/– on the remote control.
▪
▪
10
Downloaded from
DC 12V 2A
www.Manualslib.com
AUX IN
DC 12V 2A
AUX IN
ONLY FOR SERVICE
The standby LED is on when AC Plug is connected to the wall outlet and the Power of the unit is off. The
standby LED is off when the power of the unit is on.
The power of the unit automatically turns off if there is no input for 20 minutes.
The volume level increases or decreases when you press VOL +/–.
You can also use the volume controls of devices connected using the Dual Dock or Bluetooth to control
the volume. However, your ability to control the volume using the volume controls of devices connected
using Bluetooth may be limited.
manuals search engine
FUNCTION
or
MUTE
VOL
BASS
VOL
FUNCTION
or
MUTE
VOL
BASS
VOL
FUNCTION
MUTE
BASS
FUNCTION
MUTE
BASS