Important Safety Information; Key To Symbols - Epson TM-J7000 Bedienungsanleitung

English
EMC and Safety Standards Applied
Product Name: TM-J7000/TM-J7100,
Model Name:
The following standards are applied only to the
printers that are so labeled. (EMC is tested using
the EPSON power supplies.)
Europe:
North America: EMI:
Japan:
Oceania:
The connection of a non-shielded printer interface
cable to this printer will invalidate the EMC
standards of this device.
You are cautioned that changes or modifications
not expressly approved by Seiko Epson
Corporation could void your authority to operate
the equipment.
CE Marking
The printer conforms to the following Directives
and Norms:
Directive 89/336/EEC
Only for TM-J7000/J7100 IEC 61000-4-8

Important Safety Information

This section presents important information intended to ensure safe and effective
use of this product. Read this section carefully and store it in an accessible
location.

Key to Symbols

The symbols in this manual are identified by their level of importance, as defined
below. Read the following carefully before handling the product.
Warnings must be followed carefully to avoid serious bodily injury.
2 TM-J7000/J7100 – TM-J7500/J7600 User's Manual
Downloaded from www.Manualslib.com
TM-J7500/TM-J7600
M184A, M184B
CE marking
Safety: TÜV (EN 60950)
FCC/ICES-003 Class A
Safety: UL 60950/CSA C22.2
No. 60950
EMI: VCCI Class A
EMC: AS/NZS 3548 Class B
WARNING
EN 55022 Class B
EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11
WARNING:
manuals search engine
FCC Compliance Statement For
American Users
This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment
is operated in a commercial environment.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instruction manual,
may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is
likely to cause harmful interference, in which case
the user will be required to correct the interference
at his own expense.
For Canadian Users
This Class A digital apparatus complies with
Canadian ICES-003.