Sony ICF-SW7600GR Bedienungsanleitung Seite 25

To stop memory scan during operation
Press SCAN while memory scan is in operation.
When there are no stations available
If no stations are received after scanning, the unit will return to
the preset number where the scan was started and two short
beeps will be heard.
When you press SCAN for a page with no presets
Two short beeps sound, "- - - -" is displayed and the unit will
return to the previous state.
Tips
• Scanning works faster if you preset frequencies in descending or
ascending order in preset number orders.
• When scanning at night when reception is intense or when scanning
under prevalent interference, the unit may stop scanning to null
broadcasts frequently. In this case, set the ATT switch to ON, and
adjust the ATT control (see "To adjust the reception sensitivity for
scanning", page 21). Under normal conditions, set the ATT switch to
OFF.
Note
Many international broadcasts for short wave have limited broadcast
hours. Due to this, the unit may not be able to tune in to the station
outside the broadcast hours, or the unit may tune in to another station
such as the local station of your area, etc.
Listening to the radio
25 GB