Speaker Menu; Speaker Selection - ZENEC ZE-NC520 Bedienungsanleitung

SPEAKER MENU

Speaker Menu Features
Setting
Speaker Mode
Front
Surround
Subwoofer
Center

SPEAKER SELECTION

■ Selecting LARGE for the multi-channel speaker option will give a full range output.
Selecting SMALL for the multi channel speaker option will activate a high pass filter
whose crossover is dependent upon the subwoofer low pass filter frequency. For
example, if the subwoofer low pass filter is set to 80Hz, then the high pass SMALL
speaker crossover will be set to 90Hz.
Downloaded from www.Manualslib.com
Options
Full 6CH
Downmix
Large
Small
Large
Small
None
Present
None
Large
Small
None
manuals search engine
Function
6-channel mode.
2-channel mode. If you select this mode, the
selections below will not be available.
Use when front speakers have good bass
output.
Use when front speakers do not have good
bass output.
Use when rear speakers have good bass
output.
Use when rear speakers do not have good
bass output.
Use when rear speakers are not present.
Use when subwoofer is present.
Use when subwoofer is not present.
Use when center speaker has good bass
output.
Use when center speaker does not have
good bass output.
Use when center speaker is not present.
109
ENGLISH