Control Descriptions (Mcd-Mcd/S-Mcd/Cs) - FIMAR MSD/300P Benutz Und Wartungsanleitung

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ BELL PACKAGING MACHINE MCD

CONTROL DESCRIPTIONS (MCD-MCD/S-MCD/CS)

The appliance is equipped with the listed control devices, required to run its main functions.
EN
A) Main switch: used to turn electrical power on and off.
B) Button: it activates and deactivates the equipment operation.
C) Display: it shows warning/alarm messages and working parameters.
D) Button (SET): it sets up the operation parameters of equipment.
E) Button (+): to increase the value of the selected parameter or to scroll the programmes.
F) Button (-): to decrease the value of the selected parameter or to scroll the programmes.
G) Button (PUMP/GASTRO): it activates and deactivates the pre-heating of the vacuum
pump.
When the equipment is operating with closed holding bell ??, press the button once to
carry out quick sealing and to open bell.
H) Vacuum gauge: it detects the negative pressure generated by the equipment inside bell.
MCD - MCD / S
SET
A B D
SET
M B D
C H L1
E F G
MCD / CS
C H L1
E F G
- 20 -
L
P
L N
English language