Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. THE WEIGHING HAND PALLET TRUCK
2.1. TAKING THE SYSTEM INTO OPERATION
To activate the weighing system, turn it on using the on/off () button on the
terminal.
After 3 to 5 minutes the electronics and load cells have reached the operational
temperature. Before this, inaccuracies of up to ca. 0.3% may occur.
It is recommended not to lift loads before the zero-point correction has been
executed.
2.2. USE
The power supply to the system takes place through an exchangeable battery pack.
With a completely charged battery pack the total weighing time is about 70 hours.
The voltage level of the battery is shown in the display:
When the battery indication is not lid the battery is OK. When the battery triangle is
red, the battery should be charged. When the battery is completely empty, the
weighing system switches off.
When charging, it is necessary to charge the battery for at least 8 hours. This will
prevent loss of battery capacity. If you use the system in shift work, the autonomy of
70 hours should be sufficient.
The battery can be charged on the adapter supplied with the charger.
Charging cycle: Fast charging until full (about 6.5 hours), next trickle charging.
It is not possible to overload the battery because the charger automatically switches
over to trickle charge 11 hours after the charging process has started.
6
Werbung
Inhaltsverzeichnis
