Key to figure
Lamp head
Extension tubes, 2 pcs.
Earth spikes, 2 pcs.
Congratulations on the purchase of your WAGNER solar lamp.
Read the operating instructions carefully before using the equipment and observe the safety
instructions. Keep the operating instructions in a safe place.
NOTE: The solar lamp is weather-proof and should be used in direct sunlight.
i
Install the solar lamp in such a way that the solar module is exposed to as much
sunlight as possible in order to ensure maximum efficiency.
The solar lamp is equipped with an NiCd accumulator battery. This battery is
supplied uncharged. Before using for the first time, charge the battery for two
days in direct sunlight in order to achieve maximum power. For this first
charging, the main switch must be set to
Technical data
Solar panel
Size
Output with full irradiation
Accumulator
Voltage
Charging capacity
Lamp element
Power input
Lux (distance approx. 30cm)
Light duration
INSTALLATION
• Choose a site for installation with as much irradiation as possible.
• Do not place the solar lamp in the shade of trees, bushes or buildings, as
this will greatly reduce the degree of efficiency of the lamp ( ).
• Place the solar station facing south.
☞
The solar station can be set at an angle (
Summer:
Spring and autumn:
Winter:
Downloaded from
www.Manualslib.com
Equipment components
I
Operating instructions
manuals search engine
5m connection cable for lamp
Stand with removable solar station
Covering cap
0
.
6 white high-powered light emitting diodes
):
flat
medium
steep
amorphous silicon technology
approx. 195 x 144 mm²
approx. 1500 mW
2200 mAh
approx. 800 mW
approx. 3..5 lx
approx. 12 h
GB
NiCd
4,8 V
7