Harman AKG DMS800 Bedienungsanleitung Seite 106

functionAl descriPtion
DMS800 MANUAL
Submenu Function
ENCRYPTION Activate the encryption function
When the encryption function is activated, the receiv‑
er calculates a one‑off key every time a transmitter
is synchronized. This key is sent to the transmitter
during the synchronization process. The key is not
displayed and it is not possible to send the same key
to two transmitters.
Note:
For transmitters with firmware versions lower than
2.0, choose the 32‑Bit encryption. (These transmit‑
ters do not function with 512 Bit encryption.)
For transmitters with firmware version 2.0 or higher
you can achieve the highest possible security with
512 Bit encryption.
If you use a replacement transmitter for a channel,
the encryption must be deactivated.
MUTE The MUTE LOCK function deactivates the MUTE
switch on the transmitter
The transmitter synchronized with the receiver cannot
be muted with the MUTE button.
The MUTE=POWER function allows the MUTE button
of the transmitter to be used as the on/off switch as
well.
SYNCHR. Programming the transmitter to the receiver settings
TRANSMITTER
GAIN Set input level of the DSP chain
106