Safety; Intended Use; Personnel Qualification - Speck-Pumpen BADU JET Wireless Control II Originalbetriebsanleitung

2

Safety

2.1

Intended use

This remote control unit is designed for transmitting switching
commands from the hand-held transmitter to the receiver. The
commands are transmitted with the secure rolling code.
Its main use is to establish the connection with the switch box of a
countercurrent system to switch the pump and, if available, the
LED light on and off.
Other functions and free buttons can also be used for controlling
the timing and other switching modes of the output relay. In
addition, the commands to be executed can also be protected by
a personally selected code. Protected by the code, the remote
control unit can be used, for example, for a pool cover or a garage
door but not for switching the countercurrent system pump.
The receiver can also be used as a repeater amplifier.
Observing the following information is vital for intended use:
• This manual
Any other use or use exceeding this is not an intended use and
must first be authorised by the manufacturer/supplier.
The use with devices/systems with a higher accident risk, e.g.
crane systems, is expressly forbidden.
The owner has no protection against interferences from other
telecommunications systems or devices, e.g. radio systems, that
are operated duly in the same frequency range.
2.2

Personnel qualification

This unit can be used by children aged 8 and over as well as by
persons with limited physical, sensory or mental capacity or by
people with a lack of experience or knowledge, provided that they
are supervised or have been instructed in the safe use of the unit
and understand the resulting dangers. Children may not play with
the unit. Cleaning and user maintenance may not be carried out
by children without supervision.
Ensure that the following work is only performed by trained

professionals with the following qualifications:
– For mechanical work, for example replacing ball bearings
or mechanical seals: qualified mechanics.
– For work on the electric system: electricians.
06|2020
Safety
EN 7