Assembly Accessories
Screws (a)
(M6 x 20)...4pes.
Cable holder
NB: You will need a cross-point (Phillips #2) screwdriver for assembly.
Screw the adjuster into the pedal box as far as it will go, and attach the pedal
2
cable.Use screws (a) to fasten the side panels to the pedal box. Make sure that there
is no gap between the side panels and the pedal box.
This is used to adjust the height
after you've finished assembling
the stand; don't tighten it completely.
Assembling the stand
Screws (b)
(M4 x 14)...6pcs.
Piano Fasteners
...2 pcs.
Screws (a)
Pull out the
pedal cable
Caps...4pcs.
Adjuster...1pc.
...2 pcs.
Align precisely, so that there is
no gap between the side panel
and pedal box.
35