Display Setting - Yamaha MCR-750 Bedienungsanleitung

SETUP MENU

Display Setting

The default settings are marked with "
■ TV
[3D Output]
You can select 3D or 2D video output from this unit.
Auto*
This unit automatically selects 3D or 2D videos.
Off This unit always selects 2D videos.
Note
Even if you set [3D Output] to [Auto] and play back a BD 3D
disc, this unit selects 2D images depending on the connection and
the setting of TV, etc (p. 12).
[TV Screen]
You can set the screen aspect ratio of the connected TV,
and adjust the video output.
If you switch your TV (i.e. because you have bought a
new one) and the screen aspect ratio of the connected TV
changes, you will have to change the TV Screen setting.
16:9 Full Select this when this unit is connected to a TV with a
16:9 screen. When a 4:3 aspect ratio video is played
back, the video is displayed as shown below.
*
16:9 Normal Select this when this unit is connected to a TV with a
16:9 screen. When a 4:3 aspect ratio video is played
back, the video is displayed as shown below.
4:3 Pan Scan Select this when this unit is connected to a TV with a
4:3 screen. When a 16:9 aspect ratio video is played
back, the video is displayed as shown below.
4:3 Letterbox Select this when this unit is connected to a TV with a
4:3 screen. When a 16:9 aspect ratio video is played
back, the video is displayed as shown below.
On 16:9 (wide screen) TV
Original
image size
16:9 Full
4:3
Original
image size
4:3 Pan Scan
16:9
36
En
".
*
16:9 Normal
On 4:3 TV
4:3 Letterbox
[Video Out Select]
You can select the video output resolution from
[Composite], [HDMI Auto], [HDMI 1080p], [HDMI
1080i], [HDMI 720p], [HDMI 480p/576p], and [HDMI
480i/576i]. When set to [HDMI Auto], resolution is set to
the maximum resolution according to the connected TV.
For more details on output formats, refer to "About the
video output formats" (p. 39).
*
Composite, HDMI Auto , HDMI 1080p, HDMI 1080i, HDMI
720p, HDMI 480p/576p, HDMI 480i/576i
Notes
• When you connect your TV and this unit via the VIDEO jack,
select [Composite], [HDMI 480p/576p], or [HDMI 480i/576i].
• To output HD audio (such as Dolby TrueHD or DTS-HD) from
the HDMI terminal, set [Video Out Select] to [HDMI Auto] or
more than [HDMI 720p].
[TV System]
You can select [TV System] from [PAL], [NTSC] and
[Multi]. Set the same TV System as your TV set. For more
details on output formats, refer to "About the video output
formats" (p. 39).
NTSC, PAL * , Multi (Australia, Asia, China, U.K., Europe and
Russia models)
*
NTSC , PAL, Multi (Central and South America models)
[Color Space]
You can select the Color Space (p. 48) output from
HDMI. This function is available when this unit is
connected with an HDMI cable.
*
YCbCr 4:4:4 Sets Color Space to YCbCr 4:4:4.
YCbCr 4:2:2
Sets Color Space to YCbCr 4:2:2.
Full RGB When RGB is set and white and black on the screen
are too faint, select this item. This setting is effective
when a connected component supports RGB 0-255
range.
RGB
Outputs video signal at normal signal range.
Note
This function is only available on TVs that support this function.
[HDMI Deep Color]
When your TV is compatible with Deep Color (p. 48), set
this item according to your TV. This function is available
when this unit is connected with an HDMI cable.
*
30 bits, 36 bits, Off